Zanussi ZK59, Instruction Book

Page: 22 / 24

Problems and actions needed
22
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
At the end of the cooker’s life
1
Disconnect the cooker from the electrical supply.
2
Cut off the electrical lead, as close as possible to
the rear of the cooker.
3
Make sure that the oven door safety catch has been
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
Problem Action needed
The cooker has no electrical supply Check that:
•
THE FUSE
(
S
) has not gone
•
THE PLUG
is pushed in correctly
•
THE RCD
(if fitted) has not tripped
The rear left hotplate is not working
(230-volt cooker only). The cooker has an electrical inter-lock so that the rear left
hotplate cannot heat while the oven Swift Start function is on.
This hotplate can be used as soon as the oven Swift Start heat-
ing is finished.
Boiling/frying takes a long time. Check you have a suitable pan that conducts heat properly (see
“Choice of saucepan/frying pan” page 10)
The oven light is not working Replace broken bulb (see “Changing oven light bulb”
page 17)
The door safety catch isn’t working Activate the door safety catch (see “The door safety catch” on
page 6)