background image

PPC17GB

6

5. Economy dry button

When this button is pressed, the last rinse water is not
heated, with a significant saving in electrical energy.
The corresponding pilot light comes on.
In this case, the dishes are not dried automatically by
the dishwasher. 
If the pilot light is not on, the full drying cycle will be
performed. 

6. Delay start button

Allows the start of the programme to be delayed by a
minimum of 1 hour, up to 9 hours. 

How to set the delayed start:

When the button is pressed, the number 

appears

in the display (2). 

Press the button again to select the number of hours
by which you wish to delay the programme start, up to
a maximum of 9. 

E.g.: if you have selected number 

, the wash 

programme will start in 2 hours' time. 

To cancel the delayed start set, press the button until

the number 

appears. 

Close the dishwasher door to start the countdown: a
long audible signal (about one second) informs you that
the function is active. If you open the door again you will
see, in the display (2), how long there is to go (in hours)
before the programme starts. A flashing dot in the digital
display means that the delayed start function has been
activated. Opening the door has no effect on a 
countdown which has already been started. 
If, during the countdown, you wish to see the 
programme number selected in the display, press the
Programme Selector button (3). 
If, after having started the countdown by closing the
dishwasher door, you wish to cancel the delayed start,
press button (7) (CANCEL) for about 2 seconds until
the short «instruction accepted» signal is heard. 

7. Cancel / programme change button

If you wish to cancel a programme which is already
running or a setting which has just been made, press
this button for about two seconds until the short 
«instruction accepted» signal is heard. 

The number 

for the first selectable programme

(Rinse and Hold) reappears in the display whilst the 
programme selector light (3) flashes, to indicate that
the dishwasher has been reset and that a new 
programme and new options may be selected. 

Summary of Contents for ZIDW 956



















Reviews: