background image

7

PBR05GB

Rinse aid

The use of this liquid ensures thorough rinsing, spot
and streak free drying, making the water run quickly
off the dishes for sparkling results. It is automatically
added during the hot rinse. The dispenser, which is
positioned inside the door, holds about 110 ml of rinse
aid, which is sufficient for 16-40 dishwashing pro-
grammes, depending upon the dosage setting. 

Filling with rinse aid

Open the container by turning the lid (A) anticlockwise.

Add rinse aid until the container is completely full (ap-
prox. 110 ml). The indicator (B) will be completely
dark. 

Top up with rinse aid when the indicator (B) becomes
clear (approx. 70 - 80 ml). 

Remember to CLOSE the lid after every refill. 

Cautlon
Clean up any rinse aid spilt during filling with an 
absorbent cloth to avoid excess foaming during the
next wash. 

Adjusting the Dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 - minimum dose, position 6
maximum dose). (Start from position 3). Gradually 
in crease the dose if there are drops of water or lime
spots on the dishes after washing. Reduce it if there
are sticky whitish streaks on the dishes. 

Caution: Do not put liquid detergent into the rinse aid
compartment 

Use of detergent

Before starting any of the dishwashing programmes,
except for the Rinse and Hold programme, load the 
detergent in the dispenser. 

Use only tablets, powder or liquid detergents specifi-
cally designed for domestic dishwashers. 

Unsuitable detergents (such as those for washing by
hand) do not contain the right ingredients for machine
washing and hamper correct functioning of the 
machine. 

To open the dispenser lid, pull the catch (D).

To help you to correctly
dose the right amount of
detergent, inside the con-
tainer there are two refe-
rence marks:

- MIN = 15 ml

- MAX = 30 ml

The amount of detergent to be used varies depending
on how soiled the dishes are and the type of dishes
being washed. We recommend the amounts shown in
the programme chart on the next pages. 

After filling the dispenser with detergent, close
the lid. 

At the end of any washing programme the lid is always
open, ready for the next wash. 

Since not all detergents are the same, you should 
also consult the instructions on the packet. 

Remember that insufficient quantities of detergent will
produce poor washing results whereas an excessive
amount of detergent does not improve washing 
results and is also wasteful. 

Using no more than the correct amount of detergent
also contributes to reducing pollution. 

For the intensive programme

If this programme, suitable for particularly dirty pans
and dishes, is selected, an extra 10g of detergent
must be placed in the Super Intensity Dispenser SID
located in the centre of the upper basket.

Pull out the basket and
add the detergent.

All the programmes with
prewash require a small
amount of detergent (5 g)
to be poured in the SID
dispenser.

Important: Never use your dishwasher without the
SID dispenser.

BR02

C

m

ax

6 5 4 3

2

1

BR01

A

m

ax

6 5 4 3

2

1

B

BR03

D

MIN

MAX

DE07

DE14

Summary of Contents for ZIDW 954





















Reviews: