background image

PMA14GB

12

MAINTENANCE AND CLEANING

Cleaning the central filters

(After each wash)

Inspect the central filters (B) and (C) and remove any
scraps of food with a brush, under running water. 

Filters (B) and (C) are both removed by lifting up the
outer one (B) (pulling the central funnel upwards); the
smaller filter (C) can then be removed by pressing the
two tongues (D). 

Once cleaned, refit the filters by pressing them
down until they click into place. 

Cleaning the large filter

(Once a month)

Clean the large filter (A) on both sides under running
water, using a brush.
To take it out, remove the spray arm by pressing the
two tongues (E), turn the ring (F) anticlockwise 
(towards the left) and then slide the whole part out.
Refit the filter following the above instructions in 
reverse order. 

Caution: the dishwasher must not be used 
without filters. 

Incorrect repositioning of the filters will produce
poor washing results. 

Cleaning of the filters is vital to ensure correct 
operation of the machine. 

Internal and external cleaning

You must ensure that the seals around the door, the
detergent and rinse aid dispensers are cleaned 
regularly with a damp cloth. 

We recommend you carryout a maintenance wash
every 3 months, by running a 65° C wash programme
without dishes using detergent.

Check that the spray arm nozzles are not obstructed.

To remove the bottom spray arm, release it from its
securing catches and pull it out.

Clean the external surfaces of the machine and 
control panel with a soft damp cloth. If necessary use
only neutral detergents. Never use abrasive products,
scouring pads or solvents (acetone, trichloroethylene
etc...).

Check that the Super Intensity Dispenser (SID) is not
clogged with detergent residue or soil. If necessary,
rinse it under running water after having removed it
from the basket by twisting it anticlockwise and pulling
it upwards.

Refit the dispenser by following the above instructions
in reverse order. Fasten it back onto the support by
turning it clockwise.

Important: Never use your dishwasher without the
SID dispenser.

MA02

B

D

C

MA03

F

A

E

MA12

MA08

Summary of Contents for ZIDW 954





















Reviews: