Problem
Possible cause
Remedy
comes on.
The second phase of the pow-
er supply is missing.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse, wait
one minute, and insert the fuse
again.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZHRN643K
PNC 949 492 384 00
Typ 60 HAD 47 AO
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Romania
Ser.Nr. .................
7.0 kW
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Nominal Power (Max heat setting)
[W]
Cooking zone diameter [mm]
Left front
750 / 2200
120 / 210
Left rear
1200
145
Right front
1200
145
Right rear
1500 / 2400
170 / 265
For optimal cooking results use cookware no larger
than the diameter of the cooking zone.
ENERGY EFFICIENCY
PRODUCT INFORMATION ACCORDING TO EU 66/2014 VALID FOR EU MARKET ONLY
Model identification
ZHRN643K
Type of hob
Built-In Hob
Number of cooking zones
4
13