Zanussi ZHC9454X, User Manual

Page: 17 / 28

17
First decide which functioning
version is better for you
If you decide to use the hood in exhausting
version we suggest to position the upper section
of the chimney so that the oulet slots are not
visible once installation has ended, on the
contrary if is decided to use the hood in
recycling version BE SURE that the side with
slots is up (see also A-B-C sequence).
A
B
180°
C - OK!
Assembling the chimney flue
support/bracket (3 parts)
The three parts should be fixed with 4 screws,
the support extension is adjustable and should
correspond to the internal width of the
telescopic chimney flue.
=
=
X
X
G
4 x Ø 4x8
=
=
X
F
F
G
2 x
Ø 3,5 x 13
4 x
Ø 3,5 x 9,5
Assembling the deflector (3 parts –
only for filter version):
The three parts should be fixed with 2 screws,
the deflector extension is adjustable and should
correspond to the width of the chimney flue
support, to which it is then fixed.