INSTALLATION INSTRUCTIONS
-
Remove the plug from the upper part of the ducting fan unit, as it is not
possible to insert the flange
F
with the plug in place.
-
Fit the flange
F
Ø120
or
150
mm,replace the plug.
·
Air outlet directed to the right or left hand side.
-
Remove the four screws fastening the plastic frame, as shown in figure .
-
Fit the ducting spigot
R
and replace the four screws removed as above.
Fixing the chimney
a) Loosen the screws
M
fixing the two parts of the chimney and pull the
inner section
I
almost all the way out. Remove the protective film
P
.
b) Rest the lower section of the chimney in its housing on the top of the hood
canopy. Lower the ducting fan unit until it reaches the wall bracket
S
and
fix it using the screw
H
provided.Fit the cover
D
(provided) on the wall bracket
S
.
c) Fix the chimney to the hood canopy
C
using the
four screws provided.
d) Insert the transparent seal
Q
(provided),so as to
eliminate any play between the two parts of the
chimney . Lock the screws
M
.
e) Remove the support rod
B
.
17
S07_16
R
S07_19
A08_21
S
S
H
A08_23
E
E
E
E
A08_24
Q
Q
A08_22
D
A08_20
M
I
P
Summary of Contents for ZHC 95 ALU
