EN
1
13
Mounting the hood body
• Screw the two screws
12d
supplied onto the brackets
7.1
.
• Hook the hood body onto the bracket
7.1,
centring it around
the vertical line.
• Use the adjusting screws
12d
underneath the hood to level the
hood body.
7.1
12.d
Connecting up to the ducting system
• The hood must be connected to the ducting system using a
rigid or flexible pipe Ø 100 or 120 mm, the choice of which is
left to the technician carrying out installation.
• The flange
9
is preset to fit the Ø 100 mm; to adapt it to fit the
Ø 120 mm it must be cut along the cutting line using a shoe
knife.
• Fix the flange
9
to the air outlet valve using the two screws
provided with the accessories
• Connect the rigid or flexible pipe (which should be fixed using
suitable pipe connectors, not provided) to the flange
9
and to
the ducting system. Suitable materials for the above operation
must be selected and provided by the fitter.
ø 100
9
