Zanussi ZHC 604, Installation, Use And Maintenance Handbook

Page: 10 / 11

22
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
GB
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
MAINTENANCE
Regular maintenance and cleaning will ensure good performance and reliability, while
extending the working life of the hood. Special attention should be paid to the grease
filters and to the charcoal filters when the hood is used in the recirculation mode.
Synthetic grease filters
• They cannot be washed and should be
replaced every two months on average.If the
filter is equipped with chemical indicators of
saturation,replace it when the visible red-
coloured dots show all over the surface.
• Replacement
• Open the grid panel, remove the steel-wire
clips and replace the grease filter ( fig.16 ).
• Close the grid panel.
Metal grease filters
• Cleaning
These filters need to be washed with ordinary household detergent every 2 months
maximum. Thanks to their reduced dimensions, they can also be washed in the
dishwasher.
• Removing the filter
• Open the grid panel, remove the steel wire clips and the grease filter ( fig.16 ).
• Make sure that the filter is dry before replacing it, close the grid panel.
Active carbon filter
• How they work
Charcoal filters can absorb smells and odours until
they are saturated.They cannot be washed or
recycled and so they should be replaced at least
every 4 months or more frequently if the hood is
heavily used.
• Replacement
• Open the grid panel,replace the charcoal filter by
turning the locking handle anti-clockwise for
removing and clockwise for replacing (
fig.17 ).
• Close the grid panel.
ATTENTION - THERE COULD BE A POSSIBLE
FIRE HAZARD IF THE FILTERS
ARE NOT
REPLACED ACCORDING TO THESE
INSTRUCTIONS.
Fig. 16
Fig. 17