Zanussi ZGS 64IX, User Manual

Page: 6 / 24

6
Operation
Before using the appliance re-
move all packaging, including
the advertising labels and any
protective film.
Hob burner control knobs
The symbols on the knobs mean:
z
= no gas supply
= maximum gas supply
= minimum gas supply
For easier lighting, proceed before
putting a pan on the pan support
.
Lighting the burners
Push the relevant knob down and
turn it anti-clockwise until it reaches
the "maximum" position.
Then, check the flame is regular
and adjust it as required.
If you cannot light the flame even
after several attempts, check the "cap"
and “crown” (see figure 1 - lett. A
A A A A, B B B B B)
are in the correct position.
When switching on the mains, after
installation or a power cut, it is qui-
te normal for the spark generator to
be activated automatically.
In the absence of electricity, igni-
tion can occur without the
electrical device; in this case
approach the burner with a
flame, push the relevant knob
down and turn it anti-clockwise
until it reaches the "maximum"
position.
Do not keep the control knob
pressed for more than 15 se-
conds.
)
A - Burner cap
B - Burner crown
C - Ignition candle
Fig. 1