background image

6

regulations. Particular attention shall be given

to the relevant requirements regarding

ventilation.

The use of a gas cooking appliance results

in the production of heat and moisture in

the room in which it is installed. Ensure

that the kitchen is well ventilated: keep

natural ventilation holes open or install a

mechanical ventilation device

(mechanical extractor hood).

Prolonged intensive use of the appliance

may call for additional ventilation, for

example opening of a window, or more

effective ventilation, for example

increasing the level of mechanical

ventilation where present.

• Once you removed all packaging from the

appliance, ensure that it is not damaged and

the electric cable is in perfect conditions.

Otherwise, contact your dealer before

proceeding with the installation.

The manufacturer disclaims any

responsability should all the safety

measures not be carried out.

Service

• Under no circumstances should you attempt

to repair the appliance yourself. Repairs

carried out by unexperienced persons may

cause injury or serious  malfunctioning. Refer

to your local Service Centre. Always insist on

genuine spare parts.

Environmental Information

"

After installation, please dispose of the
packaging with due regard to safety and the
environment.

• When disposing of an old appliance, make

it unusable, by cutting off the cable.
The symbol

 on the product or

on its packaging indicates that this product may

not be treated as household waste. Instead it shall

be handed over to the applicable collection point

for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office, your

household waste disposal service or the shop

where you purchased the product.

Summary of Contents for ZGS 645






















Reviews: