17
Building In
These hobs can be inserted in a built-in
kitchen unit whose depth is between 550 and
600 mm. The hobs dimensions are shown in
Fig. 4.
The edge of the cut out must have a mini-
mum distance from the rear wall of 55 mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out edges
must have a minimum distance of 150 mm.
Hanging forniture units or hoods must be
placed at 650 mm. minimum from the hob.
Fitting the hob to the worktop
Carry out the building in of the hob as
follows:
1. Place the seals supplied with the hob on the
front edge of the cut out. Then, place them
at 11 mm from the side edges and at 10 mm
from the rear edge, as shown in the
diagram, taking care that the seals meet
without overlapping.
2. Place the hob in the cut out, taking care that
it is centred.
A
= Auxiliary burner
SR
= Semi-rapid burner
R
= Rapid burner
TC
= Triple Crown burner
Fig. 5
Dimensions are given in millimeters
R
SR
A
SR
510
594
TC
SR
A
SR
510
594
ZGS 645
ZGS 685
