20
ON/OFF SWITCH
FLEX
OUTLET
2
B
B
B
B
Building over a kitchen unit
uilding over a kitchen unit
uilding over a kitchen unit
uilding over a kitchen unit
uilding over a kitchen unit
with door
with door
with door
with door
with door
Proper arrangements must be taken in designing
the furniture unit, in order to avoid any contact
with the bottom of the hob which can be heated
when it is operated. The recommended solution
is shown in diagram 3.
The panel fitted under the hob ("a") should be
easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
connections.
Dimensions are given in mm.
3
ON/OFF SWITCH
FLEX
OUTLET
1
B
B
B
B
Building over a cupboard or drawer
uilding over a cupboard or drawer
uilding over a cupboard or drawer
uilding over a cupboard or drawer
uilding over a cupboard or drawer
If the hob is to be installed above a cupboard or drawer it will be necessary to fit a
heat resistant board below the base of the hob on the underside of the work surface.
It is also recommended to carry out the electrical connection to the hob as shown
in diagrams 1 and 2.
Building In
Building In
Building In
Building In
Building In
