background image

2. Cleaning and Maintenance

Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.

Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.

Regularly wipe over the hob top using a soft cloth weel
wrung out in warm water to which a little liquid detergent
has been added. Avoid the use of the following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-stick saucepans;

- steel wool pads;

- bath/sink stain removers.

Should the hob top become heavily soiled, it is
recommended that a proper cleaning product is used.

The electric ignition is obtained through a ceramic
"candle" and a metal electrode (fig. 1 lett. C). Keep
these components well clean, to avoid difficult lighting,
and check that the burner crown holes (lett. B) are not
obstructed.

PERIODIC MAINTENANCE

Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.

The periodic lubrication of the taps must be
carried out by qualified personnel, which you
must refer to also in case of malfunctioning.

Fig. 2

Fig. 3

FO 2111

FO 2110

5

Summary of Contents for ZGG 643












Reviews: