Zanussi ZFT11112WV, User Manual

Page: 9 / 16

Problem Possible cause Solution
Power indicator light is flash-
ing.
An error has occurred in meas-
uring the temperature.
Contact a qualified electrician
or contact the nearest Author-
ized Service Centre.
The appliance is not working
properly.
Contact a qualified electrician
or contact the nearest Author-
ized Service Centre.
The temperature in the appli-
ance is too high.
Contact a qualified electrician
or contact the nearest Author-
ized Service Centre.
The compressor operates con-
tinually.
Temperature is set incorrectly. Refer to "Operation" chapter.
Many food products to be fro-
zen were put in at the same
time.
Wait a few hours and then
check the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before stor-
ing.
The door is not closed correct-
ly.
Refer to "Closing the door".
The QuickFreeze function is
switched on.
Refer to "QuickFreeze func-
tion".
There is too much frost and
ice.
The door is not closed correct-
ly or the gasket is deformed/
dirty.
Refer to "Closing the door".
The water drainage plug is not
correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not wrap-
ped properly.
Wrap the food products better.
Temperature is set incorrectly. Refer to "Operation" chapter.
The compressor does not start
immediately after pressing the
QuickFreeze, or after changing
the temperature.
This is normal, no error has oc-
curred.
The compressor starts after a
period of time.
Temperature cannot be set. The QuickFreeze function is
switched on.
Switch off QuickFreeze man-
ually, or wait until the function
resets automatically to set the
temperature. Refer to "Quick-
Freeze function"
Door is misaligned or interferes
with ventilation grill.
The appliance is not levelled. Refer to "Levelling".
9