OPERATING INSTRUCTIONS
•
Connect the power cable to a 220-240V, 13 amp supply
that is located in a safe, dry area.
•
The heater must be properly installed before it is used.
•
Only operate the heater when it is in the upright position.
•
This unit is equipped with three heat settings.
●
Push the On/Off switch to the "I" position to activate
the heater.
●
Touch the touch switch once to operate the heater on
low power (900W).
●
Touch the touch switch twice to operate the heater on
medium power (1200W).
●
Touch the touch switch three times to operate the
heater on high power (2100W).
●
Touch the touch switch four times to shut the heater
off.
●
To completely turn off the patio heater, push the On/Off
switch to the
“O"
position.
18
Revision 1.3
