background image

www.zanussi.com

11

11

HR

11

EN

      Caution!

Any electrical work required to install this 

appliance should be carried out by a qualified 

electrician or competent person.

      Warning!

This appliance must be earthed.

2

3

5

4

      Important!

The wires in the mains lead are colored in 

accordance with the following code
 

Green and Yellow:  Earth

 

Brown: 

Live

 

Blue: 

Neutral

As the colours of the wires in the mains lead 
of this appliance may not correspond
with the coloured markings identifying the 
terminals in your plug, proceed as follows:

1.   Connect the wire coloured green and 

yellow to the terminal marked either with 

the letter "E" or by the earth symbol 

 

or coloured green and yellow.

2.   Connect the wire coloured blue to the 

termi-nal either marked with the letter "N" 

or col-oured black.

3.   Connect the wire coloured brown to the 

ter-minal either marked with the "L" or 

colour-ed red.

4.    Check that no cut, or stray strands of 

wire is present and the cord clamp   is 
secure over the outer sheath.

5.   Make sure the electricity supply voltage 

is the same as that indicated on the 
appliance rating plate.

6.   Switch on the appliance.
The appliance is supplied with a 13 amp plug 

fitted  . In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA 
approved (BS 1362) fuse must be used.

Warning!

A cut off plug inserted into a 13 amp socket 
is a serious safety

Electrical connection

1

3

5

Summary of Contents for ZFG06400WA













Reviews: