39
Door reversibility
The appliance must be unplugged before starting
work.
To reverse the opening direction of the door, proceed
as follows:
Remove the bottom hinge (5).
Remove the door (4).
Unscrew pin (2) from hinge (1) and replace it on the
opposite side.
Unscrew foot (6) and replace it on the opposite side.
Refit the door and bottom hinge (using the holes
provided).
Remove the handle (3) and refit it on the opposite side
(the finishing holes are already provided).
Aligning the refrigerator top with
the other kitchen units
The appliance is supplied with the top aligned with
the door. To change the alignment, proceed as
follows:
remove the two screws which secure the top at the
back, move it forward to the required position and
then refit the two screws.
Fig. 2
D054
1
2
3
4
5
6
