background image

 

35

 

WARNINGS

 

General Safety

 

ª

 

This appliance is designed to be operated by 
adults. Children should not be allowed to tamper 
with the controls or play with the product.

 

ª

 

It is dangerous to alter the specifications or modify 
this product in any way.

 

ª

 

Care must be taken to ensure that the appliance 
does not stand on the electrical supply cable.

 

ª

 

Before any cleaning or maintenance work is 
carried out, be sure to switch off and unplug the 
appliance.

 

ª

 

This appliance is heavy. Care should be taken 
when moving it.

 

ª

 

Ice lollies can cause frost burns if consumed 
straight from the appliance.

 

Service / Repair

 

ª

 

Any electrical work required to install this 
appliance should be carried out by a qualified 
electrician or competent person.

 

ª

 

This product should be serviced by an authorized 
Service Centre, and only genuine spare parts 
should be used.

 

ª

 

Under no circumstances should you attempt to 
repair the appliance yourself.
Repairs carried out by inexperienced persons may 
cause injury or more serious malfunctioning. Refer 
to your local Service Centre, and always insist on 
genuine spare parts.

 

Use

 

ª

 

The domestic refrigerators and freezers are 
designed to be used specifically for the storage of 
edible foodstuffs only.

 

ª

 

Frozen food must not be re-frozen once it has been 
thawed out.

 

ª

 

Manufacturers’ storage recommendations should 
be strictly adhered to. Refer to relevant 
instructions.

 

ª

 

The inner lining of the appliance consists of 
channels through which the refrigerant passes. If 

these should be punctured this would damage the 
appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to scrape 
off frost or ice. Frost may be removed by using the 
scraper provided. Under no circumstances should 
solid ice be forced off the liner. Solid ice should be 
allowed to thaw when defrosting the appliance. 
See defrost instructions.

 

ª

 

Do not place carbonated or fizzy drinks in the 
freezer as it creates pressure on the container, 
which may cause it to explode, resulting in 
damage to the appliance.

 

Installation

 

ª

 

There are working parts in this product which heat 
up. Always ensure that there is adequate 
ventilation as a failure to do this will result in 
component failure and possible food loss. See 
installation instructions.

 

ª

 

Parts which heat up should not be exposed. 
Wherever possible the back of the product should 
be against a wall.

 

ª

 

If the appliance has been transported horizontally, 
it is possible that the oil contained in the 
compressor flows in the refrigerant circuit. It is 
advisable to wait at least two hours before 
connecting the appliance to allow the oil to flow 
back in the compressor.

 

Environment Protection

 

ª

 

This appliance does not contain gasses which 
could damage the ozone layer, in either its 
refrigerant circuit or insulation materials. The 
appliance shall not be discarded together with 
the urban refuse and rubbish. Avoid damaging 
the cooling unit, especially at the rear near the 
heat exchanger. Information on your local 
disposal sites may be obtained from your 
municipal authorities.
The materials used on this appliance marked 
with the symbol 

 are recyclable.

 

 

It is most important that this instruction book should be retained with the appliance for future reference. 
Should the appliance be sold or transferred to another owner, or should you move house and leave the 
appliance, always ensure that the book is supplied with the appliance in order that the new owner can be 
acquainted with the functioning of the appliance and the relevant warnings.

These warnings are provided in the interest of safety. You must read them carefully before installing or 
using the appliance.

 

GB

 

Summary of Contents for ZFC 140 T











Reviews: