background image

22

USE

Starting up - temperature 
adjustment

Insert the plug in the power socket and move switch 
(D) to the ON position; it will light up to indicate that 
the appliance is switched on.
Turn knob (C) beyond position « ».

For correct storage of frozen and deep-frozen foods, 
the freezer temperature must be –18

°

C or colder.

low numbers= warmer
high numbers= colder

The temperature inside the appliance is automatically 
adjusted: generally it is best to place the thermostat 
knob in the mid position.

To stop operation of the appliance, turn knob (C) to 
position « ».

To switch off the appliance, move switch (D) to the 
OFF position.

Warning light (B)

The purpose of this light is to signal that the 
temperature inside the appliance has risen to a point 
which will not ensure correct food storage.
When the appliance is started up, or when food to be 
frozen is placed inside it, this light will stay on until 
the temperature has reached the value required for 
correct storage of food.

If the light stays on continuously (more than two 
days), after having checked that the door is 
properly closed, call the Service Centre.

Fast freezing

For fast freezing, operate switch (A).

The freezer is marked with the  

 symbol, which indicates that it is suitable for freezing fresh food 

and for long-term storage of frozen and deep-frozen foods.

Control panel

A - NORMAL-SUPER switch with yellow indicator light
B - Warning light
C - Thermostat knob for temperature adjustment
D - On-Off switch with green indicator light

7

4

2

6

1

3

5

A

B

D

C

GB

Summary of Contents for ZF134UN














Reviews: