The indicators:
,
, , and
start flashing.
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
ADJUSTING THE WATER SOFTENER
Make sure the appliance is in user mode.
1. Press
.
The indicators
, , and
are off.
The indicator
still flashes.
The indicator
starts flashing. The number of
flashes indicates the current water softener setting
(e.g. 5 f pause + 5 flashes... = level 5).
2. Press
to change the setting. Each
pressing of the button
increases the
level number by one. After reaching level 10,
the count starts from level 1.
3. Press on/off to confirm and save the setting.
THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke degrees
Water softener
level
47 -50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
<0.7
< 5
1
2)
1) Factory setting
2) Do not use salt at this level.
HOW TO DEACTIVATE THE RINSE AID
EMPTY NOTIFICATION
Make sure the appliance is in user mode.
1. Press
.
The indicators:
, and
are off. The
indicator
still flashes.
The indicator
shows the current setting. If on
= rinse aid empty notification is on, if off = rinse aid
empty notification is off.
2. Press
to change the setting.
3. Press on/off to confirm and save the setting.
ACTIVATING THE ACOUSTIC SIGNAL AT THE
END OF A PROGRAMME
Make sure the appliance is in user mode.
1. Press .
The indicators:
,
and
are
off. The indicator still flashes.
The indicator
shows the current setting. If on
= the acoustic signal is active. If off = the acoustic
signal is disabled.
2. Press to change the setting.
3. Press on/off to confirm and save the setting.
38
