1. Press
.
• The indicators
,
,
and
are off.
• The indicator
still flashes.
• The display shows the current setting: e.g.
= level 5.
2. Press
to change the setting. Each pressing
of the button
increases the level number by
one. After reaching level 10, the count starts
again from level 1.
3. Press the on/off button to confirm the setting.
If you use multi-tablets containing salt
and the hardness of your water is
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or
multitablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke degrees
Water softener
level
47 -50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
<0.7
< 5
1
2)
1) Factory setting
2) Do not use salt at this level.
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure the appliance is in user mode.
1. Press
.
• The indicators
,
,
and
are off.
• The indicator
still flashes.
• The display shows the current setting:
–
= the rinse aid empty notification
is activated.
–
= the rinse aid empty notification
is deactivated.
2. Press
to change the setting.
3. Press on/off button to confirm the setting.
When rinse aid chamber is empty, the
rinse aid indicator is turned on
notifying to refill rinse aid. If the drying
results are satisfactory while using
multi-tablets only, it is possible to
deactivate the notification for refilling
rinse aid. However, for the best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
HOW TO SET THE RINSE AID LEVEL
Make sure the appliance is in user mode.
7
