Programme
Degree of soil
Type of load
Programme phases
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
P4
Quick A30
Min
5)
Fresh soil
Crockery and
cutlery
• Wash 60 °C
or 65 °C
• Rinses
30
0.9
9
P1
Rinse and Hold
6)
All
• Prewash
14
0.1
4
P7
Plate Warmer
7)
All
• Rinse 70 °C
30
0.9
4
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficent use of water and energy conumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
3) The appliance senses the degree of soil and the quantity of items in the baskets, it automotically adjusts
the temperature and the quantity of the water, the energy consumption and the programme duration.
4) This programme has a high temperature rising phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
6) Use this programme to quickly rinse the dishes. this prevents the remaining foor to bond on the dishes
and bad odours to come out from the appliance. Do not use detergent with this programme.
7) This programme makes the dishes warm before use or removes the dust from dishes not used for a long
time. Do not use detergent with this programme.
SETTINGS
PROGRAMME SELECTION MODE
The appliance is in Programme selection mode when, after the activation, the display shows number of the
programme Eco.
• The display shows the programme duration after some seconds.
When the appliance is in Programme selection mode it is possible to set a programme.
If the control panel does not show this condition, do the CANCEL.
21
