Setting mode
The appliance is in
setting mode
when all
programme lights
are off and
End of pro-
gramme
light flashes.
IMPORTANT!
Always remember that when performing oper-
ations such as:
• selecting a washing programme
• setting the water softener
• deactivation/activation of the audible signals
the appliance
MUST
be in setting mode.
If a
programme light
is illuminated and
End of
programme
light is illuminated with fixed light,
the last performed programme is still set.
In this case the programme has to be cancelled:
1. Press and hold the
Programme selection/
Cancel
button until the light of the running
programme turns off and the
End of pro-
gramme
light is flashing.
2. Release the
Programme selection/Can-
cel
button.
Half load
button
The option must be linked to the selection of a washing
programme. (See "Programme table" chart). When
selected, the corresponding light illuminates.
Load dishes in both baskets (lower and upper).
When using the option reduce the dosage of detergent
which is normally used for a complete load.
Programme selection/cancel
button
•
Starting the washing programme:
1. Press the On-Off button.
2. Press the
Programme selection/cancel
button
once, the light of the last performed washing pro-
gramme illuminates and the
End of programme
light flashes.
3. Press the
Programme selection/cancel
button
as many times as necessary to illuminate the light
corresponding to the desired programme.
4. Close the dishwasher’s door, the programme will
start automatically.
IMPORTANT!
Once the programme has started, if you want to
change the selection made you must cancel the wash-
ing programme in progress.
•
Cancel the washing programme in progress:
1. Open the door.
2. Press and hold the
Programme selection/cancel
button until the light of the running programme
5
