background image

AT THE END OF THE PROGRAMME

5 min

The indicator 

 comes on. If you do not deactivate the appliance within 5 minutes all indicators goes off.

This helps to decrease energy consumption.
Turn the knob to  . Close the tap.

HINTS AND TIPS

GENERAL
The following hints will ensure optimal cleaning and

drying results in daily use and also help to protect

the environment.
• Remove larger residues of food from the dishes

into the waste bin.

• Do not pre-rinse dishes by hand. When needed,

use the prewash programme (if available) or

select a programme with a prewash phase.

• Always use the whole space of the baskets.

• When loading the appliance, make sure that the

dishes can be completely reached and washed

by the water released from the spray arm

nozzles. Make sure that items do not touch or

cover each other.

• You can use dishwasher detergent, rinse aid

and salt separately or you can use the multi-

tablets (e.g. ''3in1'', ''4in1'', ''All in 1''). Follow the

instructions written on the packaging. Multi-

tablets are usually suitable in areas with a water

hardness up to 21 °dH. In areas exceeding this

limit, rinse aid and salt must also be used. If you

use multi-tablets you can select the Multitab

option (if available). This option increases the

cleaning and drying results with the use of multi-

tablets.

• Select the programme according to the type of

load and degree of soil. With the ECO

programme you have the most efficient use of

water and energy consumption for crockery and

cutlery with normal soil.

THE WATER SOFTENER
The water softener removes minerals from the

water supply, which would have a detrimental effect

on the washing results and on the appliance.
The higher the content of these minerals, the harder

your water is. Water hardness is measured in

equivalent scales.
The water softener should be adjusted according to

the hardness of the water in your area. Your local

water authority can advise you on the hardness of

the water in your area. It is important to set the right

level of the water softener to assure good washing

results.

USING SALT, RINSE AID AND DETERGENT
• Only use salt, rinse aid and detergent for

dishwasher. Other products can cause damage

to the appliance.

• Detergent tablets do not fully dissolve with short

programmes. To prevent detergent residues on

the tableware, we recommend that you use the

tablets with long programmes.

11

Summary of Contents for ZDS22002WA

















Reviews: