Zanussi ZDS 689 EX, Instruction Booklet

Page: 20 / 36

Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter:
- simply pull it out by the handle.
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
Cleaning the large filter
(Every two months)
If necessary clean the large filter (B) on both sides under
running water, using a brush.
To remove the large filter
1. Remove the spray arm by pulling it upwards on
one side.
2. Turn the column (C) anticlockwise by 90° and
then slide out the filter.
3. Once cleaned refit it following the above
instructions in reverse order.
4. Ensure the filter is in its original position, the
handle of the drain filter should be pointing
towards the front of the appliance.
The dishwasher must not be used
without filters.
Incorrect repositioning and fitting of
the filters will produce poor washing
results.
Cleaning the filters is vital to ensure
correct operation of the machine.
Maintenance and cleaning
20
PMC04UK
A
MA04
C
90
°
B
MA05