Full load: 12 standard place settings
Amount of detergent required
5 g + 25 g (Type B)
Rinse aid setting
position 4 (Type III)
Upper basket
Cutlery basket
Lower basket
cup racks: position A
Installation
WARNING!
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or compe-
tent person.
Water connection
WARNING!
This appliance can be connected to either a hot
(max. 60°) or cold water supply.
With a hot water supply you can have a signif-
icant reduction of energy consumption. This
however, depends on how the hot water is pro-
duced. (We suggest alternative sources of en-
ergy that are more environmentally friendly as
e.g. solar or photovoltaic panels and aeolian).
WARNING!
Only use, for connection to the water mains,
new hose-set; old hose-set must not be reused.
CAUTION!
If the machine is connected to new pipes or
pipes which have not been used for a long time,
you should run the water for a few minutes be-
fore connecting the inlet hose.
23
