background image

Problem

Possible cause and solution

The interior of the appliance is wet.

• This is not a defect of the appliance. Humidity condensates on the

appliance walls.

Unusual foam during washing.

• Use the detergent designed specifically for dishwashers.
• Use a detergent from a different manufacturer.
• Do not pre-rinse dishes under running water.

Traces of rust on cutlery.

• There is too much salt in the water used for washing. Refer to "The

water softener".

• Silver and stainless steel cutlery were placed together. Do not place

silver and stainless steel items close together.

There are residues of detergent in the

dispenser at the end of the pro‐

gramme.

• The detergent tablet was stuck in the dispenser and was not washed

away by water.

• Water cannot wash away the detergent from the dispenser. Make

sure that the spray arms are not blocked or clogged.

• Make sure that items in the baskets do not impede the lid of the de‐

tergent dispenser from opening.

Odours inside the appliance.

• Refer to "Internal cleaning".

• Start the 

 programme with a descaler or a cleaning product de‐

signed for dishwashers.

Limescale deposits on the tableware,

on the tub and on the inside of the

door.

• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Use salt and set regeneration of the water softener even when multi-

functional tablets are used. Refer to "The water softener".

• Start the 

 programme with a descaler designed for dishwashers.

• If limescale deposits persist, clean the appliance with the suitable de‐

tergents.

• Try a different detergent.
• Contact the detergent manufacturer.

Dull, discoloured or chipped table‐

ware.

• Make sure that only dishwasher-safe items are washed in the appli‐

ance.

• Load and unload the basket carefully. Refer to the basket loading

leaflet.

• Place delicate items in the upper basket.
• Activate the GlassCare option to ensure special care for glassware

and delicate items.

Refer to "Before first use""Daily use",

or "Hints and tips" for other possible

causes.

24 ENGLISH

Summary of Contents for ZDFN662W1





























Reviews: