background image

Contents

Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  3
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6

Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  10
Technical information _ _ _ _ _ _ _ _ _ _ _ _  11
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _  11

Subject to change without notice.

 Safety 

instructions

Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and dam-
ages. Always keep the instructions with the ap-
pliance for future reference.

Children and vulnerable people safety

Warning!

 Risk of suffocation, injury or

permanent disability.

• Do not let persons, children included, with re-

duced physical sensory, reduced mental
functions or lack of experience and knowl-
edge use the appliance. They must have su-
pervision or instruction for the operation of
the appliance by a person who is responsible
for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appli-

ance door when it is open.

Installation

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C.

• Obey the installation instruction supplied with

the appliance.

Electrical connection

Warning!

 Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power supply.
If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Should the ap-
pliance power supply cable need to be re-
placed, this must be carried out by our Serv-
ice Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

Only for UK and Ireland.

 The appliance

has a 13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.

• This appliance complies with the E.E.C. Di-

rectives.

Water connection

• Make sure not to cause damage to the water

hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.
Old hose sets must not be reused.

2

 

www.zanussi.com

Summary of Contents for ZDF11001WA













Reviews: