8
Setting the water softener electronically (see table)
The dishwasher must
be switched off
Release the button. The
end of programme
indicator light will flash.
The number of flashes
corresponds to current
level set.
The end of programme
indicator light might
flash 5 times, for
example. The flashing is
repeated every 5
seconds.
To change the level,
press the
start/cancel
button. Each time the
button is pressed the
level increases. (Level 1
follows level 10).
The
end of programme
indicator light indicates
the new setting.
To memorise the
operation, turn the
programme selector dial
to position off.
Press and hold the
start/cancel
button and turn the
programme selector dial clockwise till the first
programme. Keep the button pressed until the
programme selector indicator light and the
start/cancel
indicator light start flashing.
The water softener is factory set at position 5.
156999670en.qxp 3/6/2006 2:10 PM Pagina 8
