13
Something not working?
If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an
engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the
callout will be charged even if requested within the guarantee period.
Problem
Possible cause
Solution
The drier is not working
properly
• Mains plug disconnected
• Plug in mains plug
• The START button has not
been depressed.
• Press START button
• No time programme selected
• Select time programme
• Loading door open
• Close loading door
• Fuse or residual current circuit
breaker in fuse box (domestic
installation) faulty
• Check fuse or residual current
circuit breaker. Faults can be
eliminated by an electrical
engineer
The drying results are not
satisfactory
• Wrong programme selected
• Select another (time) pro-
gramme for the next drying
cycle
• Lint filter blocked
• Clean lint filter
• Wrong filling quantity
• Observe recommended filling
quantity
• Laundry not sufficiently dried
• Pre-dry laundry sufficiently
• Deposit on the drum inner sur-
faceor on the drum ribs
• Clean drum inner surface and
drum ribs
The drying cycle
exceptionally takes a long
time
• Vented air transport disrupted
• Straighten - air venting hose
and/or clean air venting ducts
• Lint filter blocked
• Clean lint filter
The loading door
cannot be closed
• Lint filter not installed and/or
filter lid not locked in position
• Install lint filter and/or lock fil-
ter lid in position
