1. Open the small door at
the lower part of the cabi-
net
2. Turn the yellow stop
upwards
3. Pull out the reservoir
4. Open the small cover
and let water flow down
5. Close the small cover
and re-insert correctly the
reservoir
6. Push it until it clicks
and turn the yellow stop
downwards firmly lock it.
7. Close the small door
and press the START/
PAUSE button again to al-
low the programme to
continue.
Cleaning the drum
Caution! Do not use abrasives or steel wool to clean
the drum.
Lime in the water or cleaning agents may form a
barely visible lining on the inside of the drum. The
degree to which the laundry has been dried is then no lon-
ger detected reliably. The laundry is damper than expected
when removed from the appliance.
Use a standard domestic cleaner (e.g. vinegar-based
cleaner) to wipe down the inside of the drum and drum
ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners or aggressive
cleaning agents to clean the machine.
Use a damp cloth to wipe down the control panel and
housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause
Remedy
Dryer does not
work.
Dryer not connected to mains supply.
Plug in at mains socket. Check fuse in fuse box
(domestic installation).
Loading door opened.
Close loading door
The START PAUSE button not pressed.
Press the START PAUSE button.
Unsatisfactory
drying results.
Incorrect programme set.
Set suitable programme.
2)
Fluff filters clogged.
Clean fluff filters.
3)
Heat exchanger clogged.
Clean heat exchanger.
3)
Max. loading exceeded.
Respect max. loading volume.
Covered ventilation grill.
Uncover ventilation grill in base area.
Residue inside the drum.
Clean the drum inside.
To little free space around the appliance
Ensure min. 5cm free space around the appli-
ance
13
