background image

2

Installation

This appliance is heavy. Care should be taken when
moving it.

It is dangerous to alter the specifications or attempt
to modify this product in any way.

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.

Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.

If the machine is situated on a carpeted floor,
please adjust the feet in order to allow air to
circulate freely.

If the tumble dryer is placed on top of a washing
machine, it is compulsory to use the stacking kit
(available as an accessory).

Child Safety

This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.

Pets and children have been known to climb into
tumble dryers. Please check your drum before use.

Keep all packaging well away for children.

Use

Do not overload the appliance (see programme
chart).

Clothes which are dripping wet should not be
placed in the dryer.

As some bulky items such as duvets and 
eiderdowns should be dried in large commercial
machines because of their bulk, check with the
manufacturer of the item if it is suitable for drying
in a domestic machine, even if the dry weight of
the item is within the limit advised.

Please make sure that no gas lighters or matches
have accidentally been left in pockets of garments
to be loaded into appliance.

Danger of explosion

: Never tumble dry items that

have been in contact with inflammable solvents
(petrol, methylated spirits, dry cleaning fluid and
the like). As these substance are volatile, they
could cause an explosion. Only tumble dry items
washed with water.

Risk of fire: items that have been spotted or soaked
with vegetable or  cooking oil constitute a fire
hazard and should not be placed in the tumble
dryer.

If you have washed your laundry with stain
remover you must execute an extra rinse cycle
before loading your tumble dryer.

In order to avoid danger of fires caused by
excessive drying, do not use appliance to dry the
following items:
Cushions, quilts and the like (these items
accumulate heat).
Items containing rubber foam or materials similar
to rubber foam.

Leave the door slightly ajar when the appliance is
not being used. This will allow the seal to be
preserved.

Clean fluff filters after using tumble dryer. To
prevent fire risks, do not use the appliance if the
fluff filters are damaged.

Do not allow fluff to accumulate around the dryer.

Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine Zanussi-
Electrolux spare parts.

Important Safety Information

It is most important that this instruction book should be retained with the appliance for
future reference. Should the appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure that the book is supplied with the
appliance in order that the new owner can get to know the functioning of the appliance
and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.

125981241.qxp  2006-01-04  13:14  Page 2

Summary of Contents for ZDC 5375 W


























Reviews: