Cleaning the oven door
The door glass on your product can be
different in type and shape from what you
see in diagrams. The number of glasses can
be different.
Removing the glass:
1. Push the door trim at one side to remove it.
Refer to the picture.
2. Pull up the trim.
3. Remove the glass panels.
1
2
A
To replace the glass panels obey the pro-
cedure in opposite sequence. Before you
lower the trim attach the A trim part to the
door. Refer to picture.
Oven lamp
Warning!
There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
Replacing the oven lamp
1.
You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
Important!
Use the same oven lamp type.
4.
Install the glass cover.
What to do if…
Warning!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The hob does not operate
The heat setting is not set
Set the heat setting
The oven does not heat up
The oven is not switched on
Switch on the oven
The oven does not heat up
The clock is not set
Set the clock
The oven does not heat up
The necessary settings are not
set
Control the settings
The oven does not heat up
The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
The oven lamp does not operate
The oven lamp is defective
Replace the oven lamp
18
www.zanussi.com
Summary of Contents for ZCV68310WA
Page 1: ...EN User manual Cooker ZCV68310WA ZCV68310XA ...
Page 25: ...25 www zanussi com ...
Page 26: ...26 www zanussi com ...
Page 27: ...27 www zanussi com ...