Zanussi ZCV663, User Manual

Page: 18 / 24

What to do if…
Warning! Refer to "Safety information" chapter.
Problem Possible cause Remedy
The hob does not operate The heat setting is not set Set the heat setting
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not set Control the settings
The oven does not heat up The fuse in the fuse box is released Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
Steam and condensation settle on the
food and in the oven cavity
You left the dish in the oven for too
long
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
The display shows “12.00” A power cut Reset the clock
The residual heat indicator does not
come on
The cooking zone is not hot because
it operated only for a short time.
If the cooking zone must be hot,
speak to the Service Centre.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to "Safety information" chapter.
Technical Data
Dimensions
Height 900 mm
Width 600 mm
Depth 600 mm
Top oven capacity 37 l
Dimensions
Main oven capacity 69 l
Location of the appliance
You can install your freestanding appliance with cabinets
on one or two sides and in the corner.
18