20
Supply Cable
Note:
Check the rating plate for the value of the
connected load to establish the fuse rating.
The cable supplied with the appliance is an X
type connection (in compliance with standards
EN60335-1, EN60335-2-6 and subsequent
amendments) and can be installed without the
need for specialist equipment.
If the supply cable becomes worn or damaged, it
must be replaced by the manufacturer or its
Service Agent with a cable of the same type.
If the supply cable is replaced you must ensure
that the earth wire is longer than the live and
neutral wires and complies with all warnings
regarding electrical connection.
Before connecting check that:
·
fuse and household electric installation can
bear the charge of the appliance (see rating
plate);
·
The plug used for connection is easily
accessible once the appliance is installed.
Warning
The supply cable must not run across
the back of the oven.
p o w e r c o r d
Y E S
N O
p o w e r c o r d
Summary of Contents for ZCM900X
Page 26: ...26 ...
Page 27: ...27 ...
Page 28: ...28 Electrolux Household Appliances Limited 2002 310084 ...
