19
How to proceed?
•
Unscrew and remove the protective cover at
the back of the appliance;
•
Connect the power cord to the terminal of
the cooker according to the table no.1;
•
Fix by means of cable clamp;
•
Make sure that the connection to the
terminal is matching the network power;
•
Remount and screw the protective cover at
the back of the appliance.
Table no.1
Connection type
Single phase
Tri-phase
Tri-phase Y 3 ph. +
neutral
Tri-phase Y 2 ph. +
neutral
Cable connection to the
terminal plate
1 2 3 4 5
L1
N
PE
L3
5
1 2 3 4
L1
L2
PE
3
1
L3
L1
PE
4 5
N
L2
2
4 5
N
PE
2 3
L2
L1
1
Network power
230 V
230 V
230 V / 400 V
230 V / 400 V
Voltage of heating
elements
230 V
230 V
230 V
230 V
Fusible capacity
20 A
16 A
10 A
16 A
Cable section
3 x 2,5 mm²
4 x 1,5 mm²
5 x 1 mm²
4 x 1,5 mm²
OVEN LAMP REPLACEMENT
Before replacing the lamp take care that
all control knobs be on “off” position
« 0 ».
Disconnect the appliance; watch that the
oven be cool.
This lamp of 15 W, convection E 14 (230/240V)
is a special
lamp for “higher” temperature
,
up to 300
˚
C. It is
supplied on order, by your After
Sales Service.
The lamp is fixed in front of the oven and is
accessible from inside.
For reaching the lamp:
1. Unscrew the glass lamp protection (fig. 25);
2. Unscrew the lamp;
3. Replace the lamp;
4. Remount the lamp protection
During use the appliance becomes hot.
Care should be taken to avoid touching
heating elements inside the oven.
fig. 25
