Zanussi ZCKTBBQ22-C, Manual & Safety Instructions

Page: 8 / 24

BBQ ASSEMBLY
STEP 1 – Constructing the lid
•
Align the gap with a groove on the outer lid air vent (3) with the
widest gap on the inner lid air vent (4); then align those with the
groove with the widest gap on the lid (6).
• Attach the both lid air vents to the lid (6) using 1 “D” bolt, 1 “F”
washer, and 2 “E” nuts; tighten and secure with a wrench.
•
Attach the temperature gauge (5) to the lid (6) by placing the
temperature gauge (5) on the outside of the lid (6), and securing
with the supplied nut; tighten and secure with a wrench.
• Ensure that dial is correctly aligned before securing.
•
Align the holes in the lid handle (1) and the holes in the heat
resistant plate (2), with the holes in the lid (6), and the hook
bracket (7) inside the lid; secure to the lid using 2 each of the “J”
bolts and “B” washers, as shown in the diagram below.
8 ZCKTBBQ22-C
5
2
4
3
6
7
1
J
J
D
F
E
B
B
F
1 PCS
J
2 PCS
D
1 PCS
B
2 PCS
E
E
2 PCS