Zanussi ZCI66278XA, User Manual

Page: 10 / 32

To activate the function for a cooking zone:
turn the knob for a cooking zone to position A.
comes on in the display. Immediately set the
correct heat setting.
To deactivate the function: turn the knob to the
off position.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
To activate the function for a cooking zone:
touch
. comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch of the timer
to set the time (00 - 99 minutes). When the
indicator of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with
. Touch or .
To deactivate the function: set the cooking zone
with and touch . The remaining time counts
back to 00. The indicator of the cooking zone goes
out. To deactivate the function you can also touch
and at the same time.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch .
CountUp Timer (The count up timer)
You can use this function to monitor how long the
cooking zone operates.
To set the cooking zone: touch again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch of the timer.
comes on. When the indicator of the cooking
zone starts to flash slowly the time counts up. The
display switches between and counted time
(minutes).
To see how long the cooking zone operates:
set the cooking zone with . The indicator of the
cooking zone starts to flash quickly. The display
shows how long the zone operates.
To deactivate the function: set the cooking zone
with and touch or . The indicator of the
cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows .
To activate the function: touch . Touch or
of the timer to set the time. Cooking zones
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch .
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
The function has no effect on the
operation of the cooking zones.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
The function does not stop the timer functions.
Touch to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch . The previous
heat setting comes on.
If you change the heat setting, the
function stops and the display shows
the new heat setting.
10