Zanussi ZCG550, User Manual

Page: 21 / 28

Dimension mm
B 150
C 2
D 400
E 50
F less than 400
Levelling
Use small feet on the bottom of appliance to set
same level of cooker top surface with other sur-
faces
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.
Before you install stability chain, adjust the
appliance to the correct height.
Measure down 180 mm from the appliance top
surface, then measure right 30 mm (See pic-
ture). Mark the position of the wall and this gives
anchor point for the stability chain.
30 mm
180 mm
Warning! These instructions are only valid
in the countries whose symbols appear on
this booklet's cover.
Gas Category I3+
Gas Supply G30/31 (3+) –
28-30/37 mbar
Gas burners
BURNER NORMAL POWER LPG
kW inj. 100/mm g/h
Auxiliary burner 1,0 50 71,8
Semi-rapid burner 1,9 71 136,5
Rapid burner 2,9 88 244,12
Grill 2,7 95 194
Top Oven 1,9 70 136,5
Main Oven 1,9 70 136,5
Warning! Only a qualified and competent
person must do the gas installation.
Gas Connection
Use a flexible pipe in compliance with the regu-
lation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in the
fuse box. Close the primary valve of the
gas supply.
21
www.zanussi.com