12
4.2.2 Grill Burner and Roasting Skewer
The operation of the Grill burner is not dividedinto temperature grades, it only operates in
a single mode to create a constant source of heat. To do this, the valve of the grill burner
should be rotated until the designated marker for grill.
Ignition of the grill burner can be performed in 2 ways, similliar to the oven burner.
Ignition by Spark Button :
If your oven is equipped with a spark button, you should press the
grill valve and rotate the valve knob to the grill point, while also pressing the ignition button.
As the valve is equipped with a Flame Failure Device (FFD), please follow the procedures
explained under the clause 4.3. The spark button will automatically create sparks between
the spark ignitor and the burner causing the ignition occurs, the spark button can be
released.
Manual Ignition :
If your oven is not equipped by any of the ignition aids mentioned above,
or if there is an electrical blackout where you cannot use these aids, you shoud perform a
manual ignition. For a manual ignition, you should press the grill valve and rotate the valve
knob to the grill point, while holding a flame source (i.e. a lighter or match,etc) just aside the
foremost burner holes blaced on either side of the grill burner. As soon as you see the
burner is ignited,you can release the flame source. As the valve is equipped with a Flame
Failure Device (FFD), please follow the procedures explained under the clause 4.3.
In any case, while the grill burner is operated, the grill protection lid must be placed
between the oven panel and the top edge of the oven door. The grill burner should never
be operated whitout the grill protection lid, as this will cause damage to the oven due to
overheating in the control panel, as well as posing danger to the user and young children
who come in contact with the oven.
CAUTION : Accessible parts may be hot when the grill is in use. Young children should be kept away.
Roasting Skewer :
This function is used to roast chicken or other kind of meat on a skewer.
To use this function, place the skewer through the meat, by thrusting the skewer inside the
meat. Fix the meat tightly in its place by using the two forks placed on the skewer. Place a
tray on the 3rd shelf. Place the skewer housing on the tray as appropriate, and place the
skewer on the housing, while the tip of the skewer is inserted into the rotor hole. Push
therotary skewer button to start the rotor.
While roastig food using the skewer, grill burner must be operated. The obligation of
using the grill protection lid also holds for this function.
CAUTION :
*
If the burner has not lit after 15 seconds, stop operating the device, and open the
compartment door and/or wait at least 1 minute before attempting a further ignition of the
burner.
*
In the event of the burner flames being accidentally extinguished, turn off the burner control
and do not attempt to re-ignite the burner at least one minute.
4.2 USE OF OVEN PART - GAS COOKERS
4.2.1 Oven Burner
Ignition of the oven burner can be performed in two ways, depending on the model of your
cooker:
Ignition by Spark Button :
If your oven is equipped with a spark button, you should press
the oven valve and rotate the valve knob to the point where you want to perform the
cooking, while also pressing the ignition button. As the valve is equipped with a Flame
Failure Device (FFD), please follow the procedures explained under the clause 4.3.
Take spark button will automatically create sparks between the spark ignitor and the burner,
causing the ignition to occur. As soon as the ignition occurs, the spark button can be
released.
