background image

8

Control knob (fig.1)

It makes possible to choose the most
appropriate temperature and to select the
elements radiating heat one by one.

Explanations of symbols:

   

  

        

Off positions

   

       Oven light

50-250     

Temperature selection

   

        

Bottom heat

   

         

Top heat

  

  

         

Grill (at the models: ZC540 GA

  

  

                                             

and ZC 560)

To select the temperature turn the knob
clockwise until the pointer indicating the
desires temperature between 50 º–250 ºC.
The temperature will be kept constant by
the thermostat.
If you want more heat coming from the
bottom or more heat coming from the top,
turn the knob so as to place the pointer on
the symbol

 

 

(bottom heat) or

 

 

(top

heat).
Under these circumstances the
temperature will never exceed about
220ºC in the bottom heat

 

 

and 180 ºC in

the top heat position   and it will not be
regulated by the thermostat.

Electric grill (at the models: ZC 540 GA
                    and ZC 560)

 When grilling, the accessible parts

of the appliance are hot. Take care that
children do not play near it. While the
grill is in function leave the oven door
half open and put the protective screen
“A” to the knob.

The grill is used for grilling all kind of meat
(pork, beef …) which remain tender, toasts
or frying dishes already cooked.

If you use the grid slide under it, on the
lowest shelf the dripping pan to collect the
juice and fat.

250

200

150

100

50

fig. 1

fig. 2

For turning off the heating elements.

Turn the knob clockwise to position off

”.

Summary of Contents for ZC 540 AP























Reviews: