![background image](http://html.mh-extra.com/html/zanussi/z814w85bi/z814w85bi_user-manual_925134016.webp)
2
N
1
E
D
C
Counter-magnet
The appliance is pre set for a magnetic closure.
For a correct closure:
1. Position the screw C and the counter-magnet D
on the magnetic plate N. Lean the cupboard
door against the screw until it leaves a mark.
2. Open the cupboard door and screw the coun-
ter-magnet D (steel disk + rubber ring E) with
the screw C in the inner side of the cupboard
door, where the screw left the mark as descri-
bed in the first step.
ELECTRICAL CONNECTION
At the end of installation you can connect the mains
plug to the mains socket.
The rating plate on the inner edge of the appliance
door and the 'Technical Data' chapter indicate the
necessary electrical ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical installation can
take the maximum load required, also taking into
account any other appliances in use.
Connect the appliance to an earthed socket.
The power supply cable must be easily accessible
after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service Centre.
The manufacturer does not accept any
responsibility for damage or injury through failure to
comply with the above safety precaution.
16
Summary of Contents for Z814W85BI
Page 1: ...GETTING STARTED EASY User Manual Z814W85BI EN User Manual Washing Machine ...
Page 42: ......
Page 43: ......