background image

6

USE OF YOUR APPLIANCE

The control panel

Never turn the programme selector when the appliance is working.

1 ON/OFF pushbutton " "

Press the ON/OFF pushbutton, the programme
starts: the power control lamp lights on.

2 Power control lamp

By pressing the ON/OFF pushbutton, the pro-
gramme starts and this control lamp lights on.

3 Spinning speed reduction pushbutton
1000/650

This pushbutton allows to reduce the spinning
speed from 1000 to 650 on cotton programmes
and from 850 to 650 on synthetics, delicates and
wool programmes.

4 Extra rinse pushbutton " "

This pushbutton is active on cotton and synthetics
programmes. It increases the quantity of water
during the rinses.

5 Auto dry pushbutton

If you do a wash of an half-load, press in this
pushbutton and then select the chosen drying
time, before starting the wash programme. In this
way, your machine will automatically carry out the
drying programme at the end of the wash pro-
gramme. If you do a wash of a complete wash
load (5kg of cottons or 2,5 kg of synthetics), it is
necessary to dry the laundry in two times, so do
not use this pushbutton.

6 Temperature selector

Choose the temperature between cold (

) and

90°C which corresponds to the chosen pro-
gramme, with the help of the indications of the
programme table, according to the fibers and the
fastness of the colours.

7 Programme selector

It enables to select the most adapted programme
to the nature and degreees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "I".

Never turn the programme selector anticlockwise.

8 Drying time selector

Graduated up to 120 minutes for cottons and
synthetics, it enables to select the drying time
according to the nature and the quantity of laundry
to dry, and to the drying results wished (see the
control panel of your washer-dryer).

Never turn the drying selector anticlockwise.

1 2 3 4

6

7

8

 WTJ   1074 H

AUTO

1000

650

5

Summary of Contents for WTJ 1074 H






















Reviews: