9
When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided
• the machine is not in the heating or drying phase;
• the level of the water is not high;
• the drum is not turning.
Important!
You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
•
Draining of water and spinning
after the execution
of programmes with the RINSE HOLD option.
11 SKIP/RESET button
This button performs two functions:
- Clears the memory
- Selects special programmes
At the end of every programme the RESET button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a “
0
” flashing and an audible signal will
sound, when you switch the machine on.
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin
and is confirmed by the
illumination of the corresponding LED,s.
PREWASH
WASH
SPIN
RINSES
DRAIN
DRYING
START/PAUSE
To select
rinse & spin
, press the SKIP button once, the
wash
LED goes out.
To select
spin
only, press the SKIP button twice.
The
wash
&
rinse
LED,s go out.
To select
Drain
press the SKIP button three times, the
wash - rinse - spin
LED,s go out.
If you wish to cancel or advance the running
programme to the required phase, PAUSE the cycle and
then press the SKIP button as previously described.
132999022 WJS1265-1465-1665W.qxd 9/13/01 11:15 AM Pagina 9 (Nero/Process Black pellicola)
