42
SOMETHING NOT WORKING?
Problems which you can resolve yourself
Problem
Possible cause
■
The machine does not start up:
■
Check that the door is firmly closed.
■
Check that the machine is plugged in and
that there is power at the socket.
■
Check that the main fuse has not blown.
■
Check that the programme selector dial is
positioned correctly and the ON/OFF button
depressed.
■
The machine does not fill:
■
Check that the water tap is open.
■
Check that water is coming out of the tap.
■
Check that the inlet hose is not squashed or
kinked.
■
Check that the filter in the inlet hose is not
blocked.
■
Check that the door is closed.
■
The machine fills then empties
immediately:
■
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage”
section.
■
The machine does not empty
and/or does not spin:
■
There is water on the floor:
■
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
■
Check whether there are any leaks from one
of the inlet hose fittings. It is not always easy
to see this as the water runs down the hose;
check to see if it is damp.
■
Check that the drain hose is not damaged.
■
Unsatisfactory washing results:
■
Too little detergent or unsuitable detergent
has been used.
■
Stubborn stains have not been treated prior
to washing.
■
The correct temperature was not selected.
■
Excessive laundry load.
■
The machine vibrates or is noisy:
■
Check that all the transit bolts and packing
have been removed.
■
Check that the machine is not resting against
anything.
■
Check that the support feet are resting firmly
on the ground and that the lock nuts are
securely tightened.
■
Check that the laundry is evenly distributed in
the drum.
■
Maybe there is very little laundry in the drum.
■
Check that the drain hose is not squashed or
kinked.
■
A programme which stops with water in drum
has been selected.
■
Check that the laundry is evenly distributed in
the drum.
