Zanussi T 503, Instruction Manual

Page: 6 / 21

26
USE OF YOUR APPLIANCE
The control panel
1 ON/OFF pushbutton " "
Press the on/off pushbutton, the programme starts
: the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton "
" pressed). It lights
off when the cycle is finished (programme selector
on a stop position "I").
3 Cold pushbutton " "
This pushbutton allows to wash laundry with cold
water on all programmes. The water coming into
the tub is not heated.
4 Rinse hold pushbutton " "
Press this button to leave the water in the drum
after the wash cycle is completed. This works only
on synthetics, wool and delicate programmes.
The clothes are left suspended in water after the
final rinse to prevent the formation of creases.
You can end these programmes by a draining by
depressing this pushbutton or select the pro-
gramme G for a spinning phase (with the on/off
pushbutton "
" pressed out).
Never turn the programme selector when the appliance is working.
1 2 3 4 5
5 Programme selector
It enables to select the most adapted programme
to the nature and degrees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a stop position "I" for all the
programmes or on a rinse hold position " " for the
synthetics and wool programmes if the rinse hold
pushbutton " " is selected.
Never turn the programme selector anticlockwise.