4
Like all domestic refrigerators,
OZ
is designed solely
for the storage and freezing of foodstuffs.
OZ
’s refrigerant circuit contains R 600 A isobutane
hydrocarbon: maintenance work and any topping up
must be carried out only by authorised personnel.
In all refrigerators and freezers, some surfaces beco-
me covered with frost. Before trying to remove this
frost, check the defrosting instructions in this manual.
Never use metal objects to clean the appliance: they
could seriously damage the paintwork and surfaces.
Never use sharp tools to remove the frost from
OZ
.
Use the special plastic scraper supplied with the
appliance.
Never place hot liquids or food inside
OZ
, or contai-
ners fitted with a lid and filled to the brim.
Never place fizzy drinks in the freezer compartment:
the containers could explode.
During operation, the condenser and compressor located at the back of
OZ
become
hot. Make sure that the appliance has been installed in accordance with the instructions
contained in this booklet: inadequate ventilation can cause damage to the appliance and
cause it to malfunction
Warning:The
OZ
signs on the back of the appliance are ventilation ope-
nings and must always be kept clear of obstructions.
If
OZ
is transported in a horizontal position, the oil contained in the compressor can
flow into the refrigerant circuit. To allow the oil to flow back into the compressor, stand
OZ
upright and wait for at least 2 hours before switching the appliance on.
Use
Installation
Oz completo GB 19-05-1999 15:54 Pagina 4
