ENGLISH
- Select spin speed by means of button 5, and
press the START/PAUSE button.
• Drain only
- Press the RESET (ANUL.) button once, so as to
cause the DRAIN (DESCARGA) light to light up,
then press the START/PAUSE button.
Important! If you accidentally press the RESET
(ANUL.) button more than once, the display will
show three blinking dashes. To cause the
washing machine to drain the water, select any
washing programme by means of the FABRIC
(TEJIDOS) button, then press RESET (ANUL.)
three times in order to select the DRAIN
(DESCARGA) position (only the DRAIN
(DESCARGA) light will remain lit).
6 OPTIONS button (OPCIONES)
Press this button to select the following options:
• PREWASH (PRELAVADO): select this option if
you wish your laundry to be prewashed before the
main wash (not available for wool and hand-
wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
• SUPER RINSE (ACLARADO ADICIONAL): this
option can be selected with all programmes
except the wool programme and hand wash.
The machine performs 4 rinses instead of 3. This
option is recommended for people who are allergic
to detergents, and in areas where the water is very
soft.
7 QUICK WASH button (RAPIDO)
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (not
for wool and HAND WASH programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
8 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the RESET (ANUL.) button.
The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on,
if the previously selected cycle has been erased.
• Duration of washing programme in hours
and minutes, after you have selected a
programme.
While the programme is running (after you have
pressed the START/PAUSE button), the displayed
time value decreases by one unit every minute.
• The washing machine has stopped with water
in the tub, at the end of a programme with the
RINSE HOLD (AGUA EN LA CUBA) option: this is
indicated by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero.
At the same time, the door locked light goes out.
The zero will reappear when you switch the
washing machine on, unless the previous
programme has been erased by means of the
RESET (ANUL.) button.
0
2.05
---
35
