4
WARNING
CAREFULLY READ THE INSTALLATION, OPERA-
TING
AND
MAINTENANCE
INSTRUCTIONS
BEFORE INSTALLING THIS APPLIANCE. INCOR-
RECT INSTALLATION, ADAPTATIONS OR ALTER-
NATIONS COULD CAUSE DAMAGE TO PROPERTY
OR INJURY TO PERSONS. MALICIOUS DAMAGE,
DAMAGE DUE TO NEGLIGENCE, OR TO FAILURE
TO COMPLY WITH INSTRUCTIONS AND REGULA-
TIONS, OR TO INCORRECT CON-NECTIONS OR
UNAUTHORISED TAMPERING INVALIDATE ANY
WARRANTY AND RELIEVE THE MANUFACTURER
OF ALL LIABILITY.
1. Carefully read this instructions booklet, as it con-
tains important advice for safe installation, opera-
tion and maintenance. Keep this booklet to hand in
a safe place for future reference by other operators.
2. Installation should be carried out by qualified
engineers, in accordance with current regula-
tions and with the manufacturer’s instructions.
3. The appliance should only be used by persons spe-
cifically trained in this operation.
4. Switch off the appliance in the event of failure or
malfunctioning.
Only have the appliance repaired by a service centre
authorised by the manufacturer and ask for original
spare parts.
A1
HANDLING
Use suitable means to move the appliance: a lift truck
or fork pallet trucks (the forks should reach more than
halfway beneath the appliance).
A2
UNPACKING
Figure 1
Wear protective gloves to unpack.
Lift the appliance using a lift truck, remove the base
and position the appliance
Figure 2
where it is to be installed.
Figure 3
Remove the protective film and ensure that the packa-
ging material is disposed of correctly in compliance
with the regulations in force in the country where the
product is to be used.
A3
DISPOSAL
All the packaging materials are environment friendly.
They may be kept without danger, recycled or burned
in a special waste incineration plant. Recyclable plastic
components are marked as follows:
Wood and cardboard components may be disposed of
according to local regulations in force. Appliances that
have reached the end of their service life should be
suitably disposed of. The appliance should be disman-
tled according to regulations in force. All metal parts
are in stainless steel (AISI 304) and are removable.
Plastic parts are marked with the symbol of the mate-
rial.
A
GENERAL RECOMMENDATIONS
polyethylene:
external wrapping film,
instruction bag.
polypropylene:
top packaging panels,
straps.
polystyrene
foam:
protective surround ele-
ments.
PE
PP
PS
Summary of Contents for EUC
Page 2: ......
